In the previous version, the SLT320 not only upgraded the engine to 32CC power, but also replaced the main support parts of the body with CNC reinforcement parts. The front shock absorber uses CNC metal parts, which has strong and strong supporting force and is suitable for all kinds of violent toss!
Engine displacement: 31.8/cm3
Carburetor: Walbro 1107
Spark plug: NGK CMR7H
Startup mode: Easy to start hand pullback
Intake mode: scavenging
Cooling method: forced air cooling
Lubrication method: mixing
Idle speed: 4500±200/rpm
No load maximum speed: 19500/rpm
Maximum power: 2.58/13000 kW/rpm
Maximum torque: 2.26/9000 N·m/rpm
Clutch contact point speed: 8000/rpm
2, body length x width x height LxWxH: 925x527x311mm
3, track 525mm
4, wheelbase 610mm
5, 4WD drive
6, double disc brake mode
7, metal differential (front, middle and rear three differential system)
8. Front CVD drive half shaft and rear shaft head drive shaft
9, SLT resonance tube
10, the new double spring metal clutch
11, metal clutch cup support cover
12, metal differential bracket
13, 7mm hydraulic shock absorption
14, front and rear anti-roll bar group
15, high-performance professional off-road tires
16, 6V4500 mAh NiMH battery
17, 50KG digital full metal gear throttle brake (one year warranty)
18, 50KG digital full metal gear steering steering gear (one year warranty)
19, RC4G Chinese 2.4G four-channel remote control
20, PC material integrated car shell
21, one-piece hexagonal clutch cup
The shock absorbers are upgraded to CNC metal, which is not beautiful, and the strength of use is much higher than the plastic bottom!
The chassis support beam is upgraded to CNC metal! Don't worry about jumping and rolling to get deformation damage from the chassis!
The steering steering gear is upgraded to a one-year warranty of 50 kg full metal gear, no need to worry about the life of electronic equipment!
Of course, the throttle servo is also upgraded to a 50 kg one-year warranty! At the same time, we have made a metal bridge beam to the throttle brake servo, which can support the brake servo in a very strong way to pull the wrong position and deformation caused by the brakes. Fix the cover on the differential in the CNC metal! Strengthen the help of the middle differential on the brakes!
800CC super-capacity fuel tank, SLT's engine has its own unique protection frame, even without anti-roller protection, but also has this powerful engine protection frame!
SLT resonance tube, violent crisp!
Look at all the equipment locations at a glance!